File Not Found Check the File Name and Try Again Error Saving Arcgis

1. Crimson Assertion Points in the Table of Contents of ArcMap
2. Cannot [consummate the action you are request ArcMap/ArcCatalog to exercise] because it is in use by another application/user. Cannot acquire a schema lock because of an existing lock.
3. Geoprocessing Tools "Groundwork Server Threw an Exception"
4. Help! I cannot open the MXD I saved in the GIS lab at home!
5. Tool Non Licensed. Unable to execute the selected tool.
6. The ArcGIS Basemaps Will Not Load!
7. Microsoft Excel File: Failed to Connect to Database. An underlying database error occurred. Class not registered.

Red Exclamation Points in the Tabular array of Contents

Problem:

You open your MXD to be greeted with a series of cherry assertion points in the Table of Contents instead of your data drawing in the Display Window.

What Happened:

ArcGIS saved the path names from the machine you started your project, and the drive directories referenced past those path names are non the same on the car you are currently working on. For example, if you were working off an external hard drive at school, and the school calculator called it "E:", then your home computer calls that same bulldoze "F:", the path name will be wrong.

How to Fix Information technology:

Repair the Data Source

Locates the data when ArcMap cannot find it. You will know it can't find information technology when the each layer name is proceeded with a red exclamation point. Repair information source is greyed out the residuum of the time.

	Right click on layer proper noun Click on Data -> Repair Information Source Bulldoze to the proper location of the feature class Unmarried click on its name Click Okay
This method should repair all of the data source errors at once. If not, yous volition take to do information technology over again until information technology finds all of the sources.

How to Forestall it in the Futurity:

In the future, this error can be prevented past marking a box in the Map Document Properties to "save relative pathnames". This will "erase" the alphabetic character in the pathname, and the MXD will look for data in the same identify every bit it did on the other motorcar, but skips the drive alphabetic character.

Cannot [complete the activeness you are asking ArcMap/ArcCatalog to practise] because it is in use by another application/user. Cannot acquire a schema lock because of an existing lock.

Problem:

You are attempting to practise some action in ArcMap or ArcCatalog and you take gotten a super "friendly" message that the activity cannot be completed due to an existing lock.

What Happened:

ArcGIS works on a constant cache organisation, meaning if a file is in utilise in 1 program (another ArcGIS suite software, Excel, Word...) information technology cannot be used/changed modified in ArcMap.

How to Fix information technology:

The merely way to release the lock is to close the offending program (the error won't tell you, but it'southward whatever programme you're not currently using) and wait a infinitesimal or 3 for the program to completely close and the lock to be released. And so try your action again. If it still fails, try closing all your programs, the relaunching ArcCatalog/ArcMap and try again. If information technology still fails, lastly, try opening a new, bare ArcMap session, calculation the offending file, and try your activeness once more.

• NOTE: If you're working with joins/relates, this error may exist due to the fact you lot cannot edit joined data. Remove the join(s) then try your action once again.

Geoprocessing Tools "Groundwork Server Threw an Exception"

Problem:

You ran a tool from the ArcToolbox, and it failed. When you check the messages (either by clicking the link in the "failed" popular upward, or Geoprocessing Menu > Results > + Current Session > +Tool Proper name > + Letters), the error code is a super helpful "Groundwork Server Threw an Exception".

What Happened:

The groundwork server threw an exception! Duh! But for real, some part of the groundwork processing failed when running the tool.

• Background processing is a characteristic in ArcMap that allows you to go on piece of work on your projection while running tools in the groundwork

How to Set up it:

Turn Off Background Processing:

Plow off groundwork processing Geoprocessing Carte du jour Geoprocessing Options Uncheck the box next to "Enable" in the Background Processing Section Click OK to close the dialog box Run the tool again, in the foreground Open the Results tab Geoprocessing Menu > Results Double-click on the tool name. This will open up the box and populate the fields to the concluding used settings Hit OK to run the tool again.

How to Forestall it in the Futurity:

The "groundwork exception" error is hit or miss. There actually isn't a "prevention". Sorry.

Assist! I cannot open the MXD I saved in the GIS lab at home!

Problem:

You've saved your MXD in the GIS lab, merely when you lot attempt to open information technology at home, it gives an fault that this file can only be opened with ArcMap 10.x.

What Happened:

ArcGIS is not backwards compatible, meaning, that MXD's created in an earlier version volition open in a later version but MXDs created in a afterwards version will not open in an before version. For example, x.1 MXD files will open in 10.3, but x.iii MXD files volition not open in 10.ane.

How to Fix it:

Unfortunately, the just manner to gear up this problem is to become dorsum into a afterwards version of ArcMap and save the MXD to open in an earlier version.

How to Prevent it in the Future:

In all cases where the goal is to open up an MXD in an earlier version of ArcMap, you must salvage a copybefore yous shut out of the after version. That is to say, before you leave the GIS lab where the computers are running 10.three, yous must first "Salve a Copy" and designate the version you wish to save the MXD every bit.

• If you are unsure of the version of ArcMap you (or someone else) may be using, it's okay to salve as 10.0, since ArcMap volition upgrade files. But to avert versioning issues in full general, try to save the file in the target version.

1. From the File menu in ArcMap, use "Save a Copy"
2. Designate the version from the dropdown under the MXD name
3. Be sure non to open the file on the electric current motorcar, or ArcMap will try to upgrade it (it should give you a warning before it does, simply just to be condom, don't open it until you are on the target machine)

Tool Non Licensed. Unable to execute the selected tool.

Problem:

Y'all effort to run a tool, merely when y'all click to open information technology, your presented with an mistake bulletin stating the tool is not licensed and ArcGIS is unable to execute the selected tool.

What Happened:

Each extension in ArcGIS costs coin across the base of operations price of the software, and many school and companies save money by not purchasing extensions they practise not needor simply purchasing a limited amount of licenses to be shared on a network of several users. To let anybody access to all of the licences, extensions must beenabled before tools within that particular toolbox can be launched. Enabling the extension checks it out from a cardinal location and allows the tools associated with information technology to exist utilized.
Call back most it similar a public library. Instead of purchasing tons of copies of one detail best-seller, they purchase a limited number of copies, and then lend them out free of charge to their registered users. While the book is checked out, no ane else can read it. ArcGIS extensions work the same way - the extension will but work for the aforementioned number of computers for which the company or schoolhouse has paid for until they are checked back in.

How to Set it:

To ready this error:

1. notation the extension which is disabled (in this screenshot, we run across "At that place is no Spatial Analyst licence currently bachelor or enabled"
2. shut the "Tool Not Licensed" pop-up
3. enable the required extension
4. relaunch the tool

To enable an extension:

1. open the Customize menu
2. click on "Extensions" to launch the dialog box
3. identify a cheque mark in the box to the left of the extension name
4. close the Extensions dialog box

If the extension is not available (not paid for or all the copies are checked out), instead of a check mark appearing in the box, a different pop-upwardly will appear stating "There is nolicense proper name currently available"

How to Prevent it in the Time to come:

The only real "prevention" is to brand certain the extension is enabled prior to trying to run a tool. This, however, is not a existent "trouble", it can merely be annoying occasionally.

The ArcGIS Basemaps Volition Not Load!

Trouble:

When you use the dropdown to "Add together Basemap", information technology is missing OR you lot've successfully selected a basemap but it will non load in ArcMap.

What Happened:

While it's hard to tell from here, information technology's most likely an internet or software trouble.

How to Ready it:

The first thing to effort is: saving your MXD, launching ArcMap with an new, blank map, endmost ArcMap, and opening your MXD once more. This most likely won't piece of work, but it'due south worth a try.

The side by side matter to try is adding the basemaps every bit an ArcGIS Server.

How to Forbid it in the Time to come:

In that location actually isn't annihilation you can practice to prevent information technology, equally information technology was almost likely caused by an internet or software mistake. The only thing y'all tin do is make certain your connexion is expert, or apply the ArcGIS Server Method.

Microsoft Excel File: Failed to Connect to Database. An underlying database error occurred. Class not registered.

Problem:

You attempt to add together a sheet from an .xlsx file (problem does not seem to occur with .xls files), and ArcMap gives an error of "Failed to Connect to Database. An underlying database error occurred. Grade not registered".

What Happened:

ArcGIS sees Excel files as database files (we learned they were data tables - of which database files are a blazon of data tabular array), and is unable to read information technology. I don't really have a very specific reason other than that. Deplorable.

How to Fix it:

Install the 2007 Role System Commuter: Information Connectivity Components

Close ArcMap (saving your .mxd, if needed). Visit https://www.microsoft.com/en-united states of america/download/details.aspx?id=23734 and download the commuter. Install it as you lot would any other .exe This driver plug in doesn't require a restart. Restart ArcMap and attempt to add together the sail again. There shouldn't be an fault this time.

How to Fix it in the Hereafter:

Once the plug-in has been installed on your calculator, you shouldn't have the problem in the future.

alexanderaddapprilk.blogspot.com

Source: https://vector.geospatial.science/arcgis-common-problems

Share this post